Search
Thursday, September 09, 2010 ..:: Home ::.. Register  Login

Welcome to the Pilatus PC-9M Cockpit project of Fritz Weinrebe

 Project |  Photo Gallery |  Blog | Links |  Site History | Contact Me
 Blog - Fritz Weinrebe Minimize

CNC Progress 2

Feb 20

Written by: Fritz Weinrebe
20 February 2010

The rods are connected to the motors and all three axises are now moving under the control of Mach3.  The X-axis needs a bit of alignment.  The black permanent marker pen I am using to test the alignment of the CNC is straining when moving the X axis towards the right.  After checking with a ruler, I noticed the Left side is about 1mm lower than the right side.  I will be fixing this next.  Once I am 100% happy with the alignment, I will move on mount the Spindle motor and cut some real stuff.

Trackback Print
Location: Blogs Pilatus PC9M Simulator Project Blog
Tags:

Your name:
Title:
Comment:
Add Comment    Cancel  
  

a_cilliers_engraving.jpg

simmil_bit1_2.jpg

 

 
  Add to Google
 
 Blog - Fritz Weinrebe Minimize
 Print   

 Blog - Fritz Weinrebe Minimize
 Print   

 Disclaimer Minimize

The Pilatus PC-9M Simulator project is used for non-commercial, non-military purposes.  It is used for entertainment purposes.  This simulator is in no way affiliated to or endorsed by Pilatus or any other aircraft manufacturer. In no way is it reflecting specific aircraft systems in their entirety.
 Print   

Hits:

26026

Since 05 June 2007


Site Powered by:


DotNetNuke Powered! DotNetNuke.com

Powered by WebRing.
Copyright 2007-2010 by F.E. Weinrebe   Terms Of Use  Privacy Statement